Car headlights modified

In the modified in vogue today, modified car lighting system has become one of the required course of many fans. Many owners try another way to collect all kinds of lights, the car pretending to be cool. In fact, the lights are not just concerned about pretending to be cool so simple, but fans should not matter, it is closely related to every owner. Color temperature because the general domestic car factory lights factory is 3000K, after a year of use will be reduced to 2500K, or 2000K, then if you continue to use it, would significantly affect the quality of lighting, easily lead to accidents. Therefore regularly check the lighting system is necessary, of course, if you feel headlights are not bright enough, it can also be some simple methods for processing. For example, the interior shade too dirty or affect the use of shoddy lampshade glowing brightness, shade can be removed for cleaning, or simply replaced. Change Bulb exposure can also increase the effect of the headlights, but the premise is to comply with the (traffic control department under the front car headlights wattage can not be more than 55 to 60 watts) relevant state regulations （volvo turbo）.

Now on the front of the vehicle headlights there is a better modified method, but the price is relatively expensive to some, it is xenon headlights. Light intensity xenon lamp is twice as common halogen, and energy consumption is only two-thirds of its service life of up to ten times the ordinary halogen lamps. Moreover Xenon headlights increased driving safety and comfort, but also helps relieve tension and fatigue that people driving at night. Drivers can be found in the first time the danger, to obtain a sufficient reaction time, to a large extent reduce the rate of accidents at night. Today, 30 percent of the world's car manufacturers have been put before xenon headlights as original equipment of the vehicle, Audi A6, Passat B5, Buick Regal, Mazda 6 luxury models are equipped with a pre-xenon headlights. At the same time, due to the existing owners to continue to understand xenon technology, the original vehicle in front halogen headlight conversion xenon lamp has become a hot market.

So far, there are three different ways in the market for a major modification xenon headlights. One approach is the original car halogen bulb headlights removed and replaced xenon bulbs (including the bulb holder), the installation of xenon ballast wiring harness while drilling and extraction in the dust cover. Because the market has been launched adaptation H7, H4, H3, H1, HB3, HB4 halogen bulbs such as xenon bulb, so almost all of the models can be applied. While this approach can improve the brightness of the light source illuminating headlights, but there is a big security risk. Serious negative impact on the one hand due to xenon bulbs and halogen bulbs of the original size, dimensions are different, the light-emitting part of an inevitable departure from the focus position, so that the lights appear not concentrating, without proper beam function, and even cause blinding the car will increase the chance of a hundredfold. On the other hand due to the change of the original car circuit, once the product quality problems, is likely to cause a short circuit fire hazard （Audi Turbo）.

In many foreign countries, the only modification xenon bulb replacement method has been banned regulations, only to replace the entire headlight system - namely the replacement headlight assembly was only considered legitimate, and must also be equipped with a large front light cleaning device and automatic headlight adjustment. This modified approach mainly Maehara supporting xenon headlights, xenon light source that is equipped with light and mirrors designed specifically for them, and thus become an ideal modified method. modified in this way is very convenient, usually just before the headlight assembly to replace them （renault turbo）.